点击次数：
论文类型：期刊论文
发表时间：2009-01-01
发表刊物：OIL SHALE
收录刊物：SCIE、Scopus
卷号：26
期号：4
页面范围：500-512
ISSN号：0208-189X
摘要：Different residues of Huadian oil shale processing were investigated. Their inorganic chemical composition and phase structural characteristics were identified by X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). The influence of calcination conditions on processing residues at different ash activation degrees and impurities' leaching rates as well as the quality of obtained SiO(2) concentrate were investigated by a single-factor method. The results showed that only circular crossflow-type retorting-derived semicoke has different phase-structural characteristics at different calcination temperatures. In the range of 700-800 degrees C, the leaching rate of aluminum and iron reaches the maximum. To prepare SiO(2) concentrate, starting material should be calcined for 1.5 h at 700-800 degrees C. As a result, SiO(2) concentrate which meets the national standard of silica white will be obtained; the content of SiO(2) is 92.34% and its specific surface area 104 m(2)/g. Phase structures of Fushun-type retorting residue and cogeneration power plant ash did not change dramatically at different calcination temperatures. The leaching rate of Al and Fe reached the maximum. Further calcination is unnecessary in reutilization, only removal of impurities by means of acid soaker is relevant. Fushun-type retorting residue can also be used to make SiO(2) concentrate which meets the national standard; the content of SiO(2) is 90.38%, its specific surface area is 91 m(2)/g. The leaching rate of aluminum from cogeneration power plant ash is lower, and this ash cannot be used to prepare silica white meeting the national standard. It can be applied as an ingredient of cement, at brick preparation, etc. Separation and purification products are a mixture of crystalline SiO(2) and amorphous SiO(2), while the content of crystalline SiO(2) is 32.2%.