潘学民

个人信息Personal Information

副教授

硕士生导师

性别:男

毕业院校:山东大学

学位:博士

所在单位:材料科学与工程学院

学科:材料加工工程. 材料表面工程

联系方式:xmpan@dlut.edu.cn

电子邮箱:xmpan@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Study of shear transfer in Al/epoxy joint by digital photoelasticity

点击次数:

论文类型:期刊论文

发表时间:2009-06-01

发表刊物:OPTICS AND LASERS IN ENGINEERING

收录刊物:SCIE、EI

卷号:47

期号:6

页面范围:701-707

ISSN号:0143-8166

关键字:Load transfer; Interfacial shear; Adhesive joint; Digital photoelasticity

摘要:An improved six-step phase-shifting method is proposed for calculating full-field shear stress based on a four-step color phase-shifting method in digital photoelasticity. The method was verified using a disk under diametral compression and then applied to an aluminum alloy/epoxy joint for studying the shear transfer behavior. Experimental results revealed that the isochromatic fringe order and shear stress at the bonding interface are distributed continuously and increased with compression. In particular, an antisymmetric thermal residual shear stress appears at the bonding interface, because of the difference in the thermal expansion coefficients of Al and the resin. This indicates that the thermal residual shear stress at the bonding interface is self-balanced and reaches a peak at the edges of the bonding interface. The load transfer is realized by the shear band from the bonding interface to the bottom support. Basically, the bonding interfacial shear stress is balanced with the load. (c) 2008 Elsevier Ltd. All rights reserved.