|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：材料科学与工程学院副院长
性别：男
毕业院校：哈尔滨工业大学
学位：博士
所在单位：材料科学与工程学院
办公地点：铸造中心208
联系方式：0411-84707970
电子邮箱：gqchen@dlut.edu.cn
扫描关注
- [41]李康, 付雪松, 陈国清, 周文龙, 李志强, Zhou, WL (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..湿喷丸处理 Ti-6Al-4V 合金强化层的力学性能[J],中国有色金属学报（英文版）,2016,26(11):2868-2873
- [42]车晋达, 姜贝贝, 王清, 张瑞谦, 唐睿, 陈国清, 董闯, Wang, Qing(wangq@dlut.edu.cn).微量元素(Hf/Ta/Nb)添加对近α-Ti合金高温抗氧化性能的影响[J],中国有色金属学报,2016,26(10):2086-2092
- [43]Pang, C., Wang, Q., Che, J. D., Jiang, B. B., Zhang, R. Q., Chen, G. Q., Tang, R., Dong, Dai, X., Q (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Ta/Zr-Alloyed V-Cr-Ti Alloys via a Cluster-Plus-Glue-Atom Model for BCC Solid Solutions[J],TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,2016,69(8):1557-1562
- [44]Li, Kang, Fu, Xue-song, Rui-dong, Gai, Peng-tao, Zhi-qiang, Zhou, Wen-long, Chen, Guo-qing, WL (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..Fretting fatigue characteristic of Ti-6Al-4V strengthened by wet peening[J],INTERNATIONAL JOURNAL OF FATIGUE,2016,85:65-69
- [45]阴晓宁, 付雪松, 陈国清, 周文龙, 盖鹏涛, 李志强, Zhou, W., School of Materials Science, Engineering, Dalian University of TechnologyChina, email: wlzhou@126.com.湿喷丸强化对TC4钛合金表面状态及疲劳性能的影响[J],金属热处理,2016,41(3):48-53
- [46]Tang, Xiaohan, Ren, Mingfa, Bu, Fanzi, Chen, Guoqing, Li, Gang, Tong, MF (reprint author), Dalian Univ Technol, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Peoples R China., Ren, Dept Engn Mech.Strain rate dependent behaviors of a hot isotropically processed Ti-6Al-4V: Mechanisms and mate...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2016,30(2):661-665
- [47]付雪松, 陈国清, 周文龙.Mechanical properties of strengthened surface layer in Ti6Al4V alloy induced by wet peening treat...[J],Trans Nonferrous Met Soc China,2016,26(12):2868-2873
- [48]房灿峰, 陈国清, 郝海, 张兴国.机械合金化时长对Mg2Sn/Mg复合材料组织性能的影响[A],2016,59-59
- [49]Fu Xue-song, Li Kang, Sun Wei, Liu Cheng-fang, Chen Guo-qing, Zhou Wen-long.Springback Simulation in Air Bending of Titanium Alloy Sheet Using Solid Shell Element[A],2016,43:596-602
- [50]陈国清, 汤华平, 王琪, 付雪松, 周文龙.Ti-43.5Al-4Nb-1Mo-0.3B合金中β相行为和特征[J],材料热处理学报,2015,36(12):19-25
- [51]吕柏林, 苏辉, 周文龙, 陈国清, 崔跃, 高学朋, 吴敏, 刘峰.石墨摩擦学性能、润滑机理及改性的研究进展[J],材料导报,2015,29(19):60-66
- [52]李瑞冬, 付雪松, 周文龙, 陈国清, 李志强.喷丸强化与涂层复合表面处理改善Ti-6Al-4V钛合金抗微动磨损性能[J],航空制造技术,2015,17:96-99
- [53]李瑞冬, 付雪松, 周文龙, 陈国清, 李志强.喷丸强化与涂层复合表面处理改善Ti-6Al-4V钛合金抗微动磨损性能[A],2015,96-99
- [54]Liu, Cheng-fang, Zhou, Wen-long, Fu, Xue-song, Chen, Guo-qing, XS (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..A new mathematical model for determining the longitudinal strain in cold roll forming process[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,79(5-8):1055-1061
- [55]李鸿翔, 周文龙, 王惠敏, 陈国清.MSR 局部结构的流固耦合有限元分析[J],汽轮机技术,2015,2:108-110,127
- [56]祖宇飞, 陈国清, 付雪松, 韩文波, 周文龙.氧化物陶瓷高速超塑性研究进展[J],中国科学. 技术科学,2015,45(4):377-388
- [57]付雪松, 周文龙, 陈国清.喷丸强化与涂层复合表面处理改善 Ti-6Al-4V钛合金抗微动磨损性能[J],航空制造技术,2015
- [58]李壮, 陈国清, 付雪松, 常志龙, 周文龙, Zhou, Wen-Long.2219T87铝合金焊接接头的常温蠕变行为及其预测[J],中国有色金属学报,2014,24(9):2235-2242
- [59]周岩, 陈国清, 付雪松, 周文龙, Chen, GQ (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..脉冲电流对Ti-6Al-4V冷拉拔变形行为的影响[J],中国有色金属学报（英文版）,2014,24(4):1012-1021
- [60]Zu, Yufei, Chen, Guoqing, Fu, Xuesong, Luo, Keguang, Wang, Chunguang, Song, Shiping, Zhou, Wenlong, GQ (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..Effects of liquid phases on densification of TiO2-doped Al2O3-ZrO2 composite ceramics[J],CERAMICS INTERNATIONAL,2014,40(3):3989-3993