location: Current position: Home >> Scientific Research >> Paper Publications

TG-FTIR and Py-GC/MS analysis on pyrolysis and combustion of pine sawdust

Hits:

Indexed by:期刊论文

Date of Publication:2013-03-01

Journal:JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Included Journals:SCIE、EI

Volume:100

Page Number:26-32

ISSN No.:0165-2370

Key Words:Pine sawdust; Pyrolysis; Combustion; TG-FTIR; Py-GC/MS

Abstract:Pyrolysis and combustion of pine sawdust have been investigated by using thermogravimetric analyzer coupled with Fourier transform infrared spectrometry (TG-FTIR) analysis in this paper. Pyrolysis-gas chromatography and mass spectrometry (Py-GC/MS) analysis was employed to characterize subsequently the structure and composition of evolving gas in pine sawdust pyrolysis process. TG results showed that both pyrolysis and combustion of pine sawdust presented three weight loss stages, respectively. The apparent activation energy of pyrolysis reaction is 108.18 kJ mol(-1) in temperature of 239-394 degrees C, while under combustion process which is 128.43 kJ mol(-1) and 98.338 kJ mol(-1) in 226-329 degrees C and 349-486 degrees C, respectively. The evolving gaseous products during the pyrolysis and combustion infrared spectrums such as H2O, CH4, CO, CO2, phenol and alkane were found. Py-GC/MS results indicated that the main compounds of pine sawdust thermal decomposition were small molar gases, acetaldehyde, acetic acid, anhydride with formic and acetic anhydride. And possible formation pathways for main pyrolysis products were tentatively presented. (C) 2012 Elsevier B.V. All rights reserved.

Pre One:小型好氧堆肥设备处理有机垃圾

Next One:Effect of crystallization time on behaviors of glass-ceramic produced from sludge incineration ash