location: Current position: Home >> Scientific Research >> Paper Publications

Synthesis of nucleated glass-ceramics using oil shale fly ash

Hits:

Indexed by:期刊论文

Date of Publication:2010-01-15

Journal:JOURNAL OF HAZARDOUS MATERIALS

Included Journals:SCIE、EI、PubMed、Scopus

Volume:173

Issue:1-3

Page Number:427-432

ISSN No.:0304-3894

Key Words:Glass-ceramics; Oil shale fly ash; Alkalinity; Crystalline phase

Abstract:Nucleated glass-ceramics materials were produced from oil shale fly ash obtained from Huadian thermal power plant in China with the addition of analytic reagent CaO. On basis of differential thermal analysis (DTA) results, the nucleation and crystallization temperature of two parent glass samples with different alkalinity (Ak = m(CaO)/m(SiO2)) were identified as Tn(1) = 810 degrees C, Tc(1) = 956 degrees C and Tn(2) = 824 degrees C, Tc(2) = 966 degrees C, respectively. X-ray diffraction (XRD) analysis of the produced nucleated glass-ceramics materials revealed that there was a coexistence phenomenon of multi-crystalline phase and the main crystalline phase was anorthite ([Ca,Na][Al,Si](2)Si(2)O(8)). The microstructure of the glass-ceramics materials was examined by scanning electron microscope (SEM). SEM observation indicated that there was an increase in the quantity of sphere-shaped crystals when crystallization time increased. Furthermore, the increase of alkalinity caused more amorphous phase occurring in glass-ceramics materials. Through the tests of physical and mechanical properties, the glass-ceramics materials with more crystalline phase and fine microstructure had high density, fine performance of resisting compression (328.92 MPa) and negligible water absorption. Through chemical resistance tests, the glass-ceramics samples showed strong corrosion resistance. Overall results indicated that it was a feasible attempt to produce nucleated glass-ceramics materials for building and decorative materials from oil shale fly ash. (C) 2009 Elsevier B.V. Al I rights reserved.

Pre One:几种典型电子垃圾大物料量热重实验及机理研究

Next One:Modeling of thin-layer drying for dewatered sewage sludge