|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：机械工程学院
学科：机械制造及其自动化
办公地点：机械学院知方楼7013
联系方式：Email：duancz@dlut.edu.cn
电子邮箱：duancz@dlut.edu.cn
扫描关注
- [81]段春争, 王敏杰.Microstructural study of adiabatic shear bands formed in serratedchips during high-speed machinin...[J],Journal of Materials Science,2009,44(2):897-902
- [82]段春争, 王敏杰.Mechanism of Material Softening in Primary Shear Zone during Serrated Chip Formation in High Spee...[J],Key Engineering Materials,2009,407(5):504-508
- [83]Cai Yujun, Duan Chunzheng, Sun Lijie.A Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap Model[A],2009,407-408:273-+
- [84]Duan Chunzheng, Wang Minjie, Cai Yujun.Mechanism of Material Softening in Primary Shear Zone during Serrated Chip Formation in High Sp...[A],2009,407-408:504-+
- [85]Cai Yujun, Duan Chunzheng, Sun Lijie.A Feedrate Scheduling Strategy Based on a General Force Model[A],2009,407-408:509-+
- [86]Duan C., Wang M., Cai Y., Duan, C., School of Mechanical Engineering, Dalian University of Technology, Dalian, 116023, China, email: adcz71@163.com.Mechanism of material softening in primary shear zone during serrated chip formation in high spee...[J],Key Engineering Materials,2009,407-408:504-508
- [87]Duan, Chunzheng, Cai, Yujun, Li, Yuanyuan, Wang, Minjie.A Method for FE Simulation of Serrated Chip Formation during High Speed Machining Hardened Stee...[A],2008,1408-+
- [88]段春争, 王敏杰.深冷处理后W18Cr4V高速钢的显微组织[J],钢铁研究学报,2008,20(8):38-41
- [89]段春争, 张鹏宇, 李士燕.高速钢循环深冷处理工艺及机理研究[J],热加工工艺,2008,37(12):74-76
- [90]段春争, 王敏杰, 李士燕, Duan, C.-Z.(dbf71@163.com).深冷处理工艺对W6Mo5Cr4V2钢力学性能和微观组织的影响[J],材料工程,2008,6(6):40-43
- [91]段春争, 于同敏, 姜开宇, 刘莹.基于典型案例分析的高校模具课程实践教学方法研究[J],科技资讯,2008,16:176
- [92]段春争, 王敏杰, 蔡玉俊.W18Cr4V高速钢循环深冷处理后的力学性能和显微组织[J],机械工程材料,2008,32(5):23-25,81
- [93]段春争, 李园园, 李国和, 甄颖.高速切削温度场测量技术研究现状[J],机械设计与制造,2008,4:212-214
- [94]段春争, 王敏杰.高速钢循环深冷处理后的显微组织和力学性能[J],金属热处理,2008,33(3):90-93
- [95]段春争, 王敏杰.深冷处理后W18Cr4V 高速钢的显微组织[J],钢铁研究学报,2008,20(8):39-42
- [96]王敏杰, 段春争.Experimental Investigation of Chip Morphology and Milling Forces in High Speed Milling of hardene...[A],2008
- [97]段春争.FE simulation of Chip Formation during High Speed Machining[A],2008,1408-1412
- [98]李国和, 王敏杰, 段春争.基于ANSYS/LS-DYNA的金属切削过程有限元模拟[J],农业机械学报,2007,38(12):173-176
- [99]庞俊忠, 王敏杰, 段春争, 杨宇.高速铣削P20和45淬硬钢的切削力[J],中国机械工程,2007,18(21):2543-2546
- [100]段春争, 李国和, 李园园.高速切削温度场模拟仿真研究现状[J],机械制造,2007,45(7):55-56