location: Current position: Home >> Scientific Research >> Paper Publications

Wire-mesh honeycomb catalyst for selective catalytic reduction of NOx under lean-burn conditions

Hits:

Indexed by:期刊论文

Date of Publication:2008-12-15

Journal:3rd China-Japan Workshop on Environmental Catalysis and Eco-Materials

Included Journals:SCIE、CPCI-S

Volume:139

Issue:1-2

Page Number:130-134

ISSN No.:0920-5861

Key Words:Wire-mesh honeycomb; Selective catalytic reduction; Thermal response; Light-off

Abstract:The selective catalytic reduction of NOx by propene under lean-burn conditions was investigated over Pd/Ce0.66Zr0.34O2/TiO2/Al2O3 catalysts supported on wire-mesh honeycomb and was compared with pellet catalysts and ceramic monolithic catalysts. The wire-mesh honeycomb possessed high geometric surface area (GSA) of 43.0 in.(2) in.(-3) and large open frontal area (OFA) of 86.6%. The wire-mesh honeycomb catalyst exhibited high NOx conversion at lower temperatures and could be stabilized in shorter time after temperature elevation than that of ceramic monolithic catalyst in the unsteady-state experiment. The wire-mesh honeycomb catalyst also exhibited characteristics of fast light-off. (C) 2008 Elsevier B.V. All rights reserved.

Pre One:TiO2-carbon nanotube heterojunction arrays with a controllable thickness of TiO2 layer and their first application in photocatalysis

Next One:Sorption of polar and nonpolar organic contaminants by oil-contaminated soil