唐春安

个人信息Personal Information

教授

博士生导师

硕士生导师

主要任职:President of international exchange committee of the Chinese Society of Rock Mechanics and Engineering CSRME

其他任职:国际岩石力学与岩石工程学会(ISRM)中国国家小组副主席

性别:男

毕业院校:东北大学

学位:博士

所在单位:土木工程系

办公地点:综合实验四号楼330

联系方式:tca@mail.neu.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

动静组合作用下刀具破岩机制数值分析

点击次数:

发表时间:2022-10-09

发表刊物:岩土力学

所属单位:建设工程学部

期号:9

页面范围:2682-2689,2698

ISSN号:1000-7598

摘要:Based on the meso-scopic damage mechanics and the finite element method, a numerical code of rock fragmentation process analysis (RFPA) is used to simulate fragmentation process under three different loading conditions, i.e. single dynamic, combined dynamic and static loading, and the combined dynamic loading under the confining pressure. In the analysis model, the visco-elastic boundary is considered to eliminate the influence of the reflected stress waves from the boundary. Numerical simulation results show that the presence of static pressure has little effect on the value of the minimum principal stress within the rock mass, but significantly improve the level of the maximum principal stress;so the value of the shear stress is increased, as well as the possibility of the shear failure. While in the confining pressure condition, the tensile zone in the rock reduces and rock mass strength increases on the other hand. In according to the property of the rock which preformed strong in resist pressure but weak in the resist tensile, the capability of the rock increased within the certain range of the confining pressure. The cracks extend towards both side of the free surface and the failure in the rock becomes more complex under the influence of the confining pressure. The proportion of the pressure failure increases obviously while almost all the damage is tensile failure occurred in the single dynamic loading and combined dynamic and static loading model. The research results will be helpful for understanding the mechanism of rock failure under the dynamic-static loading and underground engineering construction.

备注:新增回溯数据