宋刚
个人信息Personal Information
教授
博士生导师
硕士生导师
性别:男
毕业院校:大连理工大学
学位:博士
所在单位:材料科学与工程学院
学科:材料连接技术
办公地点:材料学院铸造工程中心406
联系方式:0411-84707817
电子邮箱:songgang@dlut.edu.cn
扫描关注
- [141]Wang, Hongyang, Song, Gang, Feng, Baoqiang, Liu, Liming.The Research on Welding Sources and Ni Interlayer Synergy Regulation in Laser-Arc Hybrid Weldin...[A],2018,1(1):94-100
- [142]宋刚, 迟佳玉, 于景威, 刘黎明.镁/钢激光-电弧复合焊接接头的腐蚀行为[J],材料导报,2018,32(16):2773-2777
- [143]Song, Gang, Li, Taotao, Zhang, Zhaodong, Liu, Liming, ZD (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Liaoning Adv Welding & Joining Technol, Dalian 116024, Peoples R China..Investigation of unequal thickness Mg/steel butt-welded plate by hybrid laser-tungsten inert ga...[J],JOURNAL OF MANUFACTURING PROCESSES,2017,30:299-302
- [144]刁卓, 宋刚, 刘黎明.激光-电弧复合焊接AZ31B/ZM5异种镁合金组织及性能分析[J],焊接技术,2017,05:30-34
- [145]宋刚, 于景威, 刘黎明.激光离焦量对镁/钢异种金属激光-TIG复合焊的影响[J],焊接技术,2017,05:62-66
- [146]张兆栋, 宋刚, 王吉宁, 杨俊慧, Song, Gang(songgang@dlut.edu.cn).铸造镁合金A-TIG补焊工艺分析[J],焊接学报,2017,38(3):87-90
- [147]张兆栋, 杨俊慧, 宋刚, 王吉宁.铸造镁合金A-TIG补焊工艺分析[J],焊接学报,2017,3:87-90
- [148]Ren, Daxin, Zhao, Dewang, Gang, Song, Chang, Ying, Pan, Min, Kunmin, K (reprint author), 2 Ling Gong Rd, Dalian 116024, Peoples R China..Ultrasonic spot welding of magnesium alloy to titanium alloy[J],SCRIPTA MATERIALIA,2017,126:58-62
- [149]任大鑫, 赵坤民, 范蓉, 宋刚, 常颖.Bending of sheet aluminum alloy assisted by arc pretreatment. International[J],Journal of Advanced Manufacturing Technology,2017
- [150]Liu, Liming, Fang, Disheng, Song, Gang, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Liaoning Provin, Peoples R China..Experimental Investigation of Wire Arrangements for Narrow-Gap Triple-Wire Gas Indirect Arc Wel...[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(16):2136-2142
- [151]宋刚, 宋士平, 刘黎明.Q235薄板高速电弧搭接焊工艺及效率分析[J],焊接技术,2016,11:43-46
- [152]王鹏, 张兆栋, 宋刚, 刘黎明.铝合金激光-电弧复合增材制造工艺分析[J],焊接技术,2016,10:10-13
- [153]宋刚, 王杰, 于景威, 刘黎明.AZ31 B/Q235激光诱导电弧填丝焊连接界面分析[J],焊接学报,2016,37(7):93-96
- [154]Wang, Hongyang, Song, Gang, HY (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Liaoning Adv Welding & Joining Technol, Dalian, Peoples R China..Influence of Adhesive and Ni on the Interface between Mg and Fe in the Laser-TIG-Adhesive Hybri...[J],INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2016,17(6):823-827
- [155]宋刚, 王杰, 于景威, 刘黎明.添加过渡层的镁合金/钢激光-TIG电弧复合熔化焊接机制[J],焊接学报,2016,37(5):69-72
- [156]Wang H., Li Q., Song G., Liu L..Laser-arc hybrid welding of titanium alloy and stainless steel with copper interlayer[J],Zhongguo Jiguang/Chinese Journal of Lasers,2016,43(5)
- [157]Fang, Disheng, Song, Gang, Liu, Liming, LM (reprint author), Dalian Univ Technol, Key Lab Liaoning Adv Welding & Joining Technol, Sch Mat Sci & Technol, Dalian 116024, Peoples R China..A Novel Method of Triple-Wire Gas Indirect Arc Welding[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(3):352-358
- [158]王鹏, 张兆栋, 宋刚, 刘黎明.铝合金激光-电弧复合增材制造工艺分析[J],焊接技术,2016,10:10-13
- [159]任大鑫, 赵坤民, 宋刚.Cold Stamping of 6061 Al Alloy Assisted by Arc Welding Pretreatment[A],2016,877(11):617-624
- [160]王红阳, 李权, 宋刚, 刘黎明.基于铜合金中间层的钛合金与不锈钢激光-电弧复合热源焊接研究[J],中国激光,2016,43(5):503002