|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：吉林工业大学
学位：博士
所在单位：机械工程学院
电子邮箱：pinghu@dlut.edu.cn
扫描关注
- [281]胡平, 李伟东.Investigation on the Load Capacity and Failure Process of T-joint by Experiments and Numerical Me...[J],Advanced Material Research,2012,328(2011):1317-1321
- [282]胡平, 李伟东.考虑汽车车身涂装工艺影响的非平衡胶接接头强度研究[J],机械工程学报,2012,48(11):93-102
- [283]胡平, 韩小强.车用高强度钢板热冲压技术的发展与自主研发[J],锻压与冲击,2012,301(3):18-23
- [284]胡平.Nonconforming isogeometric analysis using Mortar method[A],2012
- [285]胡平.Nonconforming isogeometric analysis using TC++ Splines[A],2012
- [286]胡平.Exact geometry based quasi-conforming analysis for Euler-Bernoulli beam[J],Theoretical & Applied Mechanics Letters,2012,2(5):15-20
- [287]Pang, Jian, Du, Yu, Hu, Ping, Li, Weidong, Ma, Z. D., WD (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..An Energy Conservation Algorithm for Nonlinear Dynamic Equation[J],JOURNAL OF APPLIED MATHEMATICS,2012,2012
- [288]胡平, 夏阳.拟协调元研究综述[J],力学进展,2012,42(6):755-770
- [289]张华伟, 刘相华.轧制差厚板单向拉伸性能研究[J],大连理工大学学报,2012,52(5):648-651
- [290]鲍镜如, 张向奎, 郭威, 胡平, Zhang, X.(email4zxk@gmail.com).基于模板的2-D特征截面线参数化设计[J],农业机械学报,2011,42(12):225-230
- [291]韩啸, 侯文彬, 胡平.车身薄壁梁结构刚度特性的仿真研究[J],汽车技术,2011,12:8-13
- [292]胡平, 郭润清, 侯文彬, 姜兆娟.概念车身梁截面厚度优化设计[J],汽车技术,2011,10:1-5
- [293]李晓东, 赵剑, 侯文彬, 余树洲, 胡平, 韩小强.车辆工程专业多层次开放式实验教学体系的构建[J],实验技术与管理,2011,28(10):147-150
- [294]胡平, 郭景华, 李琳辉, 王荣本, Hu, P..智能车辆纵横向反演变结构协调控制[J],电机与控制学报,2011,15(10):88-94
- [295]彭洪梅, 胡平, 申国哲, 吴沈荣, 王安东, Peng, H..薄壁直梁碰撞性能仿真和参数影响分析[J],汽车工程,2011,33(9):782-786
- [296]Hu P., Jiang Z., Qi C., Guo R., Han X., An W..Front crash simulation and design improvement of a pure electric vehicle[A],2011,1085-1088
- [297]Yang, S., Qi, C., Hu, P., Wei, Z., Wang, Y., S (reprint author), Dalian Univ Technol, Sch Automot Engn, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Liaoning, Peoples R China..Topology optimization of electric vehicle body in white based on SIMP method[J],Advanced Materials Research,2011,308-310:606-609
- [298]郑国君, 门永新, 胡平, 赵福全, Hu, P.(pinghu@dlut.edu.cn).基于知识的CAE后处理流程化平台关键技术[J],机械工程学报,2011,47(17):112-118
- [299]刘伟杰, 周平, 张向奎, 胡平.板材成形的多步逆成形法中的优化问题[A],2011,1-6
- [300]阚东彬, 孔令霞, 马宁, 申国哲, 胡平, 刘立忠.分区冷却热成形过程中的组织演变和力学性能预测[A],2011,1-6