|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：吉林工业大学
学位：博士
所在单位：机械工程学院
电子邮箱：pinghu@dlut.edu.cn
扫描关注
- [161]Zhang, Wei, Ma, Zhengdong, Hu, Ping, W (reprint author), Dalian Univ Technol, 2 Linggong Rd, Dalian 116024, Peoples R China..Mechanical properties of a cellular vehicle body structure with negative Poisson's ratio and en...[J],JOURNAL OF REINFORCED PLASTICS AND COMPOSITES,2014,33(4):342-349
- [162]宋明亮, 胡平, 刘建军, 孙元.基于仿生语义驱动的形态设计程序方法[J],美术大观,2014,1:88-89
- [163]贺斌, 邓泽涵, 张万鑫, 盈亮, 赵曦, 胡平.热冲压模具冷却水道FEM-CFD耦合优化研究[J],热加工工艺,2014,43(3):1-4
- [164]王长生, 齐朝晖, 张向奎, 胡平, Hu, Ping.内参型四边形四节点拟协调平面单元[J],力学学报,2014,46(6):971-976
- [165]胡平, 张向奎.A modified PMA method to generate sliding constraint surface in multi-step inverse approach[A],2014,1052-1056
- [166]盈亮, 胡平.Optimization Design Method of School Bus Structure Lightweight on the Rollover Safety[A],2014,28:261-268
- [167]祝雪峰, 胡平.B++ splines and Isogeometric Analysis[A],2014
- [168]盈亮, 胡平, 申国哲.Numerical Simulation of Temperature Field, Microstructure Evolution and Mechanical Properties of ...[A],2014,962(2013):962-965
- [169]盈亮, 胡平, 张立文.Investigation of Mechanical Property and Springback Behavior with Hot Stamping RCP Process[A],2014,1063:186-189
- [170]盈亮, 胡平, 张立文.Temperature-dependent IHTC Property for Oxidation Micro-layer of 22MnB5 in Hot Stamping Process[A],2014,94-100
- [171]李宝军, 胡平, 刘秀平.Concurrent Editing of Styling and Structure of Auto[A],2014,331-336
- [172]Yao, Baozhen, Hu, Ping, Zhang, Mingheng, Tian, Xiaomei, BZ (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Peoples R China..IMPROVED ANT COLONY OPTIMIZATION FOR SEAFOOD PRODUCT DELIVERY ROUTING PROBLEM[J],PROMET-TRAFFIC & TRANSPORTATION,2014,26(1):1-10
- [173]唐立民, 胡平, 夏阳.有限元法的误区和拟协调元[J],中国科学. 物理学, 力学, 天文学,2014,44(8):838-850
- [174]史栋勇, 胡平, 盈亮, 申国哲, 刘文权, Hu, Ping.基于动力显式算法的热成形数值模拟预测[J],工程力学,2014,31(12):186-192
- [175]宋明亮, 李丹, 王博, 胡平.基于形态仿生基因特征的太阳能赛车造型设计[J],艺术与设计(理论),2013,12:123-125
- [176]Ying Liang, Lu Jin-dong, Chang Ying, Tang Xing-hui, Hu Ping, Zhao Kun-min, Chang, Y (reprint author), Dalian Univ Technol, Sch Automot Engn, State Key Lab Struct Anal Ind Equipment, Dalian 116024, Liaoning, Peoples R China..Optimization Evaluation Test of Strength and Toughness Parameters for Hot-Stamped High Strength...[J],JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2013,20(11):51-56
- [177]连静, 高仁璟, 李琳辉, 胡平.基于虚拟仪器的汽车空调远程实验系统[J],实验室科学,2013,16(5):105-108
- [178]Zhu, Xue-Feng, Hu, Ping, P (reprint author), Dalian Univ Technol, Sch Automot Engn, Dalian 116024, Liaoning Provin, Peoples R China..Mesh parameterization based on inverse finite element method: theory and application[J],INVERSE PROBLEMS IN SCIENCE AND ENGINEERING,2013,21(7):1169-1182
- [179]王宇, 刘立忠, 胡平, 欧迎春, 左岩, Wang, Y..界面黏结强度对风窗玻璃碰撞吸能性的影响[J],汽车工程,2013,35(9):790-793
- [180]Hu, Ping, Ying, Liang, Li, Ye, Liao, Zhengwei, Y (reprint author), Dalian Univ Technol, Sch Automot Engn, Linggong Rd 2, Dalian 116024, Liaoning Provin, Peoples R China..Effect of oxide scale on temperature-dependent interfacial heat transfer in hot stamping proces...[J],JOURNAL OF MATERIALS PROCESSING TECHNOLOGY,2013,213(9):1475-1483