location: Current position: Home >> Scientific Research >> Paper Publications

Monitoring and evaluating the failure behavior of ice structure using the acoustic emission technique

Hits:

Indexed by:期刊论文

Date of Publication:2016-09-01

Journal:COLD REGIONS SCIENCE AND TECHNOLOGY

Included Journals:SCIE、EI、Scopus

Volume:129

Page Number:51-59

ISSN No.:0165-232X

Key Words:Ice structure; Acoustic emission; Parametric analysis; Damage evaluation; Failure mode

Abstract:In this study, damage properties of ice structures were analyzed using acoustic emission (AE) signals. Furthermore, AE characteristic parameters were obtained under uniaxial compression and three-point bending tests of ice specimens. Characteristic AE parameters including b-value and correlogram with RA-AF analysis were carried out. Parametric correlation analysis was used for illustrate the feasibility of using AE technique to monitor ice structure. The damage process and failure mechanism were discussed based on the AE signal characteristics that were measured during ice deformation process. Fracture modes can be differentiated by the relationship between the ratio of the rise time to the waveform amplitude and average frequency analysis under compression and bending failure. The proposed approach was capable of identifying an initial yielding and critical information of ice failure mechanism. (C) 2016 Elsevier B.V. All rights reserved.

Pre One:Identification of failure mechanisms for CFRP-confined circular concrete-filled steel tubular columns through acoustic emission signals

Next One:Design of External Sensors Board Based on Bluetooth interface of Smart Phones for Structural Health Monitoring System