location: Current position: Home >> Scientific Research >> Paper Publications

Behavior of CO2/water flow in porous media for CO2 geological storage

Hits:

Indexed by:期刊论文

Date of Publication:2017-04-01

Journal:MAGNETIC RESONANCE IMAGING

Included Journals:SCIE、PubMed

Volume:37

Page Number:100-106

ISSN No.:0730-725X

Key Words:CO2 geological storage; Residual water saturation; Capillary number; Relative permeability; MRI

Abstract:clear understanding of two-phase fluid flow properties in porous media is of importance to CO2 geological storage. The study visually measured the immiscible and miscible displacement of water by CO2 using MRI (magnetic resonance imaging), and investigated the factor influencing the displacement process in porous media which were filled with quartz glass beads. For immiscible displacement at slow flow rates, the MR signal intensity of images increased because of CO2 dissolution; before the dissolution phenomenon became inconspicuous at flow rate of 0.8 mL min(-1). For miscible displacement, the MR signal intensity decreased gradually independent of flow rates, because supercritical CO2 and water became miscible in the beginning of CO2 injection. CO2 channeling or fingering phenomena-were more obviously-observed with lower permeable porous media. Capillary force decreases with increasing particle size, which would increase permeability and allow CO2 and water to invade into small pore spaces more easily. The study also showed CO2 flow patterns were dominated by dimensionless capillary number, changing from capillary finger to stable flow. The relative permeability curve was calculated using Brooks-Corey model, while the results showed the relative permeability of CO2 slightly decreases with the increase of capillary number. (C) 2016 Elsevier Inc. All rights reserved.

Pre One:Displacement front behavior of near miscible CO2 flooding in decane saturated synthetic sandstone cores revealed by magnetic resonance imaging

Next One:Density characteristics of CO2-CH4 binary mixtures at temperatures from (300 to 308.15) K and pressures from (2 to 18) MPa