Hits:

Date of Publication:2012-01-01

Journal:化工学报

Issue:2

Page Number:572-577

ISSN No.:0438-1157

Abstract:The angle between high pressure port and middle pressure port is one of the most important structure parameters for gas wave ejector. In this study, the influence of this angle on the performance of gas wave ejector is analyzed by numerical simulation and experiment. The prediction method for the optimal angle is proposed. For any given conditions, there is an optimal angle ωopt. When the angle is greater than the optimal one, a reflected shock wave is generated and the isentropic efficiency of gas wave ejector decreases significantly; while the angle is less than the optimal one, the efficiency declines slightly for the case of lower middle pressure. However, if the middle pressure is higher than pM-extra, the pressure inside the channel after a cycle is lower than that at the middle pressure outlet. A compression wave is produced when the channel is exposed to the outlet, so the efficiency drops sharply as the port angle decreases. The calculation results agree well with the experimental data, so the model could predict the optimal angel effectively. When the temperature and pressure of the inflows are constant, the optimal angels at different middle pressures are almost the same, but increase linearly with the rotation speed. The above conclusions provide guidance for gas wave ejector design and optimization. © All Rights Reserved.

Note:新增回溯数据