jztOqw43AB4CaThRZWppcI1rjk7smAubxQMBIbCZv0iOD757LLIAvqWSD2Bu
Current position: Home >> Scientific Research >> Paper Publications

Effect of heating treatment on the resistivity of polycrystalline silicon

Release Time:2019-03-11  Hits:

Indexed by: Conference Paper

Date of Publication: 2010-06-26

Included Journals: Scopus、CPCI-S、EI

Volume: 675-677

Page Number: 113-+

Key Words: heating treatment; resistivity; polycrystalline silicon

Abstract: Effect of heat treatment in atmosphere on the resistivity of polycrystalline silicon has been investigated in this paper. After heat treatment at 1050 degrees C for 10h, there is no obvious change of the resistivity in the N-type region of polycrystalline silicon, which could be contributed to the complicated influence factors, such as more impurities content and defects. On the other hand, an obvious increase of the resistivity was observed in the P-type region which could be contributed the redistribution of Al and B in the Si-SiO2 interface. The resistivity of the P-type region increased from less than 1 Omega.cm to several hundreds Omega.cm.

Prev One:Study on continuous casting of cladding aluminium alloys with electromagnetic brake

Next One:Fabrication and properties of Al/Al-Cu functionally graded material