location: Current position: Home >> Scientific Research >> Paper Publications

Zirconium nitride (ZrN) fibers prepared by carbothermal reduction and nitridation of electrospun PVP/zirconium oxychloride composite fibers

Hits:

Indexed by:期刊论文

Date of Publication:2008-10-01

Journal:CHEMICAL ENGINEERING JOURNAL

Included Journals:SCIE、EI、Scopus

Volume:144

Issue:1

Page Number:149-152

ISSN No.:1385-8947

Key Words:Electrospinning; Ceramic; Fibers; Zirconium nitride

Abstract:Zirconium nitride (ZrN) fibers were synthesized by carbothermal reduction and nitridation of composite fibers obtained by electrospinning. The structure and morphology of ZrN fibers were characterized by the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). After calcinations at 1600 degrees C, the surface of ZrN fibers with average diameter about 500 nm is rough but the continuous microstructure was still maintained by the connection of irregular fine particles. The diameter of ZrN crystalline was in the range of 100-500 nm. Both X-ray diffraction (XRD) and Raman spectroscopy analysis indicated that the zirconium nitride fibers have a NaCl-structure cubic cell and the better crystallinity of grains. (C) 2008 Elsevier B.V. All rights reserved.

Pre One:静电纺丝技术制备纤维的研究

Next One:Hollow fibers of yttria-stabilized zirconia (8YSZ) prepared by calcination of electrospun composite fibers