location: Current position: Home >> Scientific Research >> Paper Publications

WS2 nanoflakes based selective ammonia sensors at room temperature

Hits:

Indexed by:期刊论文

Date of Publication:2017-03-01

Journal:SENSORS AND ACTUATORS B-CHEMICAL

Included Journals:SCIE、EI、ESI高被引论文

Volume:240

Page Number:273-277

ISSN No.:0925-4005

Key Words:WS2 nanoflakes; Ammonia sensor; Room-temperature gas sensors

Abstract:A selective room-temperature ammonia sensor using WS2 nanoflakes as the sensing materials was successfully developed in this work. The two-dimensional WS2 sharing the same structure with MoS2, has a typical graphene-like 2D microstructure. The WS2 nanoflakes based sensor shows a good sensitivity and an excellent selectivity to ammonia at room temperature. The sensor showed an increased resistance when exposed to ammonia from 1 ppm to 10 ppm indicating a p-type response. The response and recovery time of the sensor to 5 ppm ammonia are similar to 120 s and similar to 150 s, respectively. The developed ammonia sensor shows excellent selectivity to formaldehyde, ethanol, benzene and acetone at room temperature. The response of the sensor increased as the humidity increase up to 73% possibly due to the sulfides ions-assisted hydroxylation of the co-adsorbed water and the oxidation of the solvated ammonia with adsorbed oxygen ions on the surface of the WS2 nanoflakes. (C) 2016 Elsevier B.V. All rights reserved.

Pre One:Percolation effect of reduced graphene oxide (rGO) on ammonia sensing of rGO-SnO2 composite based sensor

Next One:WS2nanoflakes based selective ammonia sensors at roomtemperature