Hits:

Indexed by:期刊论文

Date of Publication:2013-01-01

Journal:MATHEMATICAL PROBLEMS IN ENGINEERING

Included Journals:SCIE、EI、Scopus

Volume:2013

ISSN No.:1024-123X

Abstract:A multidegree-of-freedom coupling dynamic model, which contains a joint cutterhead, an inner ring gear, a support shield body, and pinions, is established, considering the external stochastic excitations, time-varying meshing stiffness, transmission errors, clearance, and so forth. Based on the parameters of an actual project and the strong impact of external excitations, the modal properties and dynamic responses are analyzed, and the cutterhead joint surface loads are obtained and treated by rain flow count. Numerical results indicate that the low natural frequencies are 57 Hz and 61 Hz, and natural vibration modes are pinions-motors rotational mode and translational-overturning coupled mode of cutterhead with inner ring gear correspondingly. Besides, the axial and radial amplitude of dynamic responses are 0.55 mm and 0.25 mm, respectively. The frequencies of radial, torsional, and overturning vibrations are predominantly concentrated in 112 Hz and 120 Hz, which indicates that the vibration responses of cutterhead are mainly affected by the external excitations. Finally, as the rain-flow counting results have shown, the standard deviation of the cutterhead joint surface loads in each direction increases by 12-15 times, compared with that of the external excitations; therefore inertia effect should be considered in cutterhead design. The proposed research lays a foundation for dynamic performance optimization and fatigue crack growth life assessment of cutterhead structure.