卢一平

个人信息Personal Information

教授

博士生导师

硕士生导师

主要任职:材料科学与工程学院院长、党委副书记

其他任职:辽宁省高熵合金材料工程研究中心常务副主任、大连理工大学滇西产业发展研究院先进材料制备及装备技术工程研究中心主任

性别:男

毕业院校:西北工业大学

学位:博士

所在单位:材料科学与工程学院

学科:材料加工工程. 材料学. 材料物理与化学

办公地点:辽宁省凝固控制与数字化制备技术重点实验室315室

联系方式:0411-84709400

电子邮箱:luyiping@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Refining of metallurgical grade silicon by electron beam melting

点击次数:

论文类型:会议论文

发表时间:2010-10-16

收录刊物:EI、Scopus

卷号:2

页面范围:319-322

摘要:Silicon is used as a substrate for photovoltalc conversion of energy and the photovoltalc properties of the polycrystalline silicon depend mainly on the crystalline structure (grain size and presence of defects) and of the purity of the material. Off-spec scrap silicon from the semiconductor industry is used as solar grade silicon (SOG-Si). However, because it is difficult to secure a steady supply of this material, development of a process to produce at low cost silicon is therefore definitely necessary. In this research, the technique of silicon purification in an electron beam furnace was used, where the melting occurs in a high vacuum and the impurities were extracted by evaporation. Metallurgical grade silicon (MG-Si) in the granulose form with leaching, with an initial purity of 99. 88% in mass were used as starting materials. The final purity was above 99.99% in mass. This result demonstrated that this process was technically viable. This paper mainly studied the impurity distribution in the sample and the macro-and microstructure of the sample after electron beam melting. Meantime, the growth mechanism of crystal was also discussed.