|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：材料科学与工程学院院长、党委副书记
其他任职：辽宁省高熵合金材料工程研究中心常务副主任、大连理工大学滇西产业发展研究院先进材料制备及装备技术工程研究中心主任
性别：男
毕业院校：西北工业大学
学位：博士
所在单位：材料科学与工程学院
学科：材料加工工程. 材料学. 材料物理与化学
办公地点：辽宁省凝固控制与数字化制备技术重点实验室315室
联系方式：0411-84709400
电子邮箱：luyiping@dlut.edu.cn
Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
点击次数：
论文类型：期刊论文
发表时间：2017-02-01
发表刊物：ACTA MATERIALIA
收录刊物：SCIE、EI、ESI高被引论文
卷号：124
页面范围：143-150
ISSN号：1359-6454
关键字：High entropy alloys; Industrial scale casting; Mechanical properties; Eutectic; In-situ X-ray diffraction
摘要：High entropy alloys (HEAs) usually possess weak liquidity and castability, and considerable compositional inhomogeneity, mainly because they contain multiple elements with high concentrations. As a result, large-scale production of HEAs by casting is limited. To address the issue, the concept of eutectic high entropy alloys (EHEAs) was proposed, which has led to some promise in achieving good quality industrial scale HEAs ingots, and more importantly also good mechanical properties. In the practical large-scale casting, the actual composition of designed EHEAs could potentially deviate from the eutectic composition. The influence of such deviation on mechanical properties of EHEAs is important for industrial production, which constitutes the topic of the current work. Here we prepared industrial-scale HEAs ingots near the eutectic composition: hypoeutectic alloy, eutectic alloy and hypereutectic alloy. Our results showed that the deviation from eutectic composition does not significantly affect the mechanical properties, castability and the good mechanical properties of EHEAs can be achieved in a wide compositional range, and at both room and cryogenic temperatures. Our results suggested that EHEAs with simultaneous high strength and high ductility, and good liquidity and castability can be readily adapted to large-scale industrial production. The deformation behavior and microstructure evolution of the eutectic and near-eutectic HEAs were thoroughly studied using a combination of techniques, including strain measurement by digital image correlation, in-situ synchrotron X-ray diffraction, and transmission electron microscopy. The wavy strain distribution and the therefore resulted delay of necking in EHEAs were reported for the first time. (C) 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.