|
个人信息Personal Information
教授
博士生导师
硕士生导师
主要任职：材料科学与工程学院院长、党委副书记
其他任职：辽宁省高熵合金材料工程研究中心常务副主任、大连理工大学滇西产业发展研究院先进材料制备及装备技术工程研究中心主任
性别：男
毕业院校：西北工业大学
学位：博士
所在单位：材料科学与工程学院
学科：材料加工工程. 材料学. 材料物理与化学
办公地点：辽宁省凝固控制与数字化制备技术重点实验室315室
联系方式：0411-84709400
电子邮箱：luyiping@dlut.edu.cn
Characteristics of clad aluminum hollow billet prepared by horizontal continuous casting
点击次数：
论文类型：期刊论文
发表时间：2014-01-01
发表刊物：JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
收录刊物：SCIE、EI
卷号：214
期号：1
页面范围：60-66
ISSN号：0924-0136
关键字：Clad hollow billet; Aluminum alloys; Casting; Interfaces; Microstructure; Plastic deformation
摘要：The 3003/4045 clad hollow billets are prepared in the present study. Microstructures, solute distribution and bonding strength of the interfacial regions were investigated. The effects of plastic deformation on the evolution of microstructure and microhardness of the interfaces were also studied. The results show that metallurgical bonding between the solid and liquid Al alloys can be obtained with optimal parameters. Si and Mn atoms diffuse across the interface to form a diffusion layer with the thickness about 30 pm on average. The mean tensile-shear strength of as-cast clad hollow billet is 85.3 +/- 9.2 MPa, and the strength of the interface is higher than that of 3003 alloy. Incompatible deformation between 3003 and 4045 layers occurs during rolling processes, and the needle-like Si phase transforms to the dispersive particles. The gradient distribution of microhardness across the interface is retained after the deformation. (C) 2013 Elsevier B.V. All rights reserved,