location: Current position: Home >> Scientific Research >> Paper Publications

Study on preparation and properties of carbon nanotubes/hollow glass microspheres/epoxy syntactic foam

Hits:

Indexed by:期刊论文

Date of Publication:2017-01-01

Journal:JOURNAL OF POLYMER ENGINEERING

Included Journals:SCIE

Volume:37

Issue:1

Page Number:93-98

ISSN No.:0334-6447

Key Words:carbon nanotubes; compression strength; hollow glass microspheres; syntactic foam; water absorption

Abstract:Hollow glass microspheres (HGMs)/epoxy syntactic foam reinforced by multiwalled carbon nanotubes (MWCNTs) was prepared in this study. The effect of MWCNTs on the density, mechanical properties and water absorption of HGMs/epoxy syntactic foam was investigated. Because of the low density and low content of MWCNTs, the density of HGMs/epoxy syntactic foam does not change much with adding MWCNTs. In addition, the compression strength of HGMs/epoxy is enhanced by 17-25% when adding 0.3 wt% MWCNTs. The fracture surfaces of specimens were examined with scanning electron microscopy (SEM), and results indicated that the bridging effect of MWCNTs is the reinforcement mechanism. Analyzing the water absorption testing results, it is concluded that MWCNTs may decrease the water absorption content due to the hydrophobicity. Bigger inorganic ions in salt water could prevent the water diffusion, which results in a decrease of water absorption. In addition, the water absorption rate decreases with the extension of testing time.

Pre One:Y对Fe-Si-B-Cu-Nb合金热稳定性与软磁性能的影响

Next One:Microstructures and properties of rapidly solidified Cu90Zr10-xAlx alloys