Hits:

Indexed by:会议论文

Date of Publication:2016-10-20

Included Journals:EI

Volume:898 MSF

Page Number:1300-1304

Abstract:The 5083 aluminum alloy was prepared and subjected to cryogenic rolling (CR) after heat treatment. The samples were reduced from 15mm to 1.5 mm in the thickness direction and the amount of deformation was 90%. For comparison, samples with the same deformation amount were obtained by room temperature rolling (RTR). The corrosion behavior of CR and RTR samples was measured by electrochemical test, and their microstructures before and after corrosion had been studied through electron scanning microscopy (SEM) and optical microscope (OM). The influence of cryogenic rolling on the corrosion behavior of 5083 aluminum alloys was explored. The experiment results suggested that anti-corrosion ability of 5083 aluminum alloys could be enhanced through cryogenic rolling. The corrosion potential elevated and the corrosion current density reduced according to the electrochemical test. The primary reasons and corresponding mechanism were also discussed. © 2017 Trans Tech Publications, Switzerland.