location: Current position: Home >> Scientific Research >> Paper Publications

Solidification structure of 6063 alloy under pulsed magnetic field

Hits:

Indexed by:会议论文

Date of Publication:2014-07-04

Included Journals:EI、Scopus

Volume:817

Page Number:355-359

Abstract:The influences of pulsed magnetic field (PMF) on solidification structure of 6063 alloy were studied in this article. The results show that solidification structure of 6063 alloy can be refined with the application of PMF. The dendrite growth restrained and the macrostructure changed from large dendrite grains to fine equiaxed grains. The grain size decreased when the voltage increased from 0V to 600V. However, when the pulse frequency increased from 5Hz to 15Hz, the average grain size decreased continuously until reached a limit, and then the grains coarsened with further increase of the pulse frequency. The vibration caused by PMF not only made the temperature field of the melt uniform,but also brook off the initial solidified grains formed on the cold wall of the mold, and spurs the grains to move to the center of melt which can be acted as nuclei. ? (2015) Trans Tech Publications, Switzerland.

Pre One:Investigation of the wear behavior of high strength and high conductivity Cu-Cr-Zr alloy under dry sliding

Next One:Effect of Ti element on microstructure and properties of Cu-Cr alloy