接金川

个人信息Personal Information

教授

博士生导师

硕士生导师

性别:男

毕业院校:哈尔滨工业大学

学位:博士

所在单位:材料科学与工程学院

学科:材料加工工程

办公地点:铸造中心101

联系方式:0411-84706220

电子邮箱:jiejc@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Characterisation of steel/nickel bronze clad strips prepared by continuous solid/liquid bonding method

点击次数:

论文类型:期刊论文

发表时间:2019-10-13

发表刊物:MATERIALS SCIENCE AND TECHNOLOGY

收录刊物:EI、SCIE

卷号:35

期号:15

页面范围:1840-1847

ISSN号:0267-0836

关键字:Continuous solid; liquid bonding; microstructure; hardness; tensile shear strength; interface; rolling

摘要:A continuous solid/liquid bonding method was successfully developed to fabricate Cu-10wt-%Ni-1wt-%Fe (nickel bronze) clad steel with a good metallurgical bonding in the present study. The results indicated that the diffusion distance of interface is about 1.90-2.18 mu m. The average tensile shear strength of centre composite strip at as-cast state is 228 +/- 5 MPa, while that of edge is 202 +/- 6 MPa, and the interface strength is higher than that of bronze since the fracture always occurs on the nickel bronze side. After the rolling process, the tensile shear strength increases with the increasing rolling reduction. The reason can be ascribed to the strengthening of the nickel bronze whose strength is still lower than the interface.