接金川

个人信息Personal Information

教授

博士生导师

硕士生导师

性别:男

毕业院校:哈尔滨工业大学

学位:博士

所在单位:材料科学与工程学院

学科:材料加工工程

办公地点:铸造中心101

联系方式:0411-84706220

电子邮箱:jiejc@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Study of the mechanical, structural, and electrical properties and annealing effect of a Cu-30Zn-1Ni-0.2Si alloy fabricated using cryogenic rolling

点击次数:

论文类型:期刊论文

发表时间:2019-11-01

发表刊物:MATERIALS RESEARCH EXPRESS

收录刊物:EI、SCIE

卷号:6

期号:11

ISSN号:2053-1591

关键字:Cu-Zn alloys; cryogenic rolling; precipitates; strength; ductility

摘要:In the present study, the Cu-30Zn alloy was selected as the experimental material, the Ni and Si elements were added to prepare a new Cu-30Zn-1Ni-0.2Si alloy. The two alloys subjected to cryogenic rolling were annealed at 300 degrees C for different times. Their mechanical, structural, and electrical properties have been characterized. The results revealed that the strength of Cu-30Zn alloy decreases severely after annealing, but the Cu-30Zn-1Ni-0.2Si alloy maintains a high strength due to the generation of Ni2Si precipitates. For example, the average tensile strength of the as-rolled Cu-30Zn alloy is 711.3 MPa, while it reduces to 562.3 MPa and 546.7 MPa after annealing for 1 h and 2 h. In contrast, the average tensile strength of the as-rolled Cu-30Zn-1Ni-0.2Si alloy is 742.5 MPa, it can be enhanced to 768.4 MPa when annealing at 300 degrees C for 1 h. Moreover, even prolonging the annealing time to 2 h, the average strength is still 701.3 MPa which is close to that of the as-rolled Cu-30Zn alloy. This study provided a feasible strategy to solve the exclusion of strength and ductility in the Cu-30Zn alloy fabricated through cryogenic rolling followed by annealing, and it may also be suitable for other Cu-Zn alloys and solid solution strengthening alloys.