大连理工大学主页平台管理系统付雪松 2Al2铝合金时效成形的微观组织和力学性能中文主页

论文成果

Superplastic Forming of Oxide Ceramic Composite: 点击次数：; 发布时间： 2019-03-11; 发布时间：2019-03-11; 论文类型：会议论文; 发表时间：2011-11-04; 收录刊物：Scopus、CPCI-S、EI; 卷号：512-515; 页面范围：407-+; 关键字：Oxide ceramic composite; Superplastic forming; Mechanical properties; 摘要：The paper mainly focused on the two issues that restricted the practical application of superplastic ceramics, which were the low strain rate in superplastic forming as well as resulted severely cavitation in deformed materials. The alumina-based composites Al2O3-ZrO2(3Y) and Al2O3-30mol%ZrO2(3Y)-30mol%MgAl2O4 (AZ30S30) were selected as research materials. The nano-sized composite powders were synthesized by heating of ethanol-aqueous salt solution method. The superplastic forming tests under the compressive stress state were carried out to evaluate the superplastic formability of the as-sintered materials. The results demonstrated that the following conditions were the essentials for attaining high-strain-rate superplastic forming in alumina based ceramic composites: reduced the initial grain size and suppressed dynamic grain growth in deformation by second phase dispersion, enhanced diffusivity by co-doped certain elements, as well as provided new rate-controlling accommodation process in superplastic forming. The results also indicated that during the superplastic forming the cavitation damage was eliminated because of the compression stress state, which ensured the mechanical properties after deformation.

上一条：钛合金高温防氧化玻璃-陶瓷涂料的制备及表征

下一条：热处理工艺对重型履带板用钢组织与性能的影响

付雪松

同专业博导同专业硕导个人学术主页

副教授博士生导师硕士生导师

性别：男

毕业院校：大连理工大学

学位：博士

所在单位：材料科学与工程学院

学科：材料加工工程

办公地点：大连理工大学铸造中工程心

电子邮箱：