大连理工大学主页平台管理系统付雪松 Corrosion Behavior and Microstructure of 2024 Aluminum Alloy Sheets by Shot Peen Forming in a Salt Spray Environment 中文主页

论文成果

Development of a Composite Friction Material with Excellent Fade Resistance by Employing Oversized Ceramic Particles: 点击次数：; 发布时间： 2019-03-11; 发布时间：2019-03-11; 论文类型：期刊论文; 发表时间：2018-03-01; 发表刊物：TRIBOLOGY LETTERS; 收录刊物：EI、SCIE; 卷号：66; 期号：1; ISSN号：1023-8883; 关键字：Friction theory; New friction material; Oversized particles; Fade resistance; Wear; 摘要：Non-asbestos organic friction materials have historically been developed through a series of trial-and-error experimental procedure. But in this work, the friction theory was used to design and prepare a new composite friction material with excellent fade resistance. Oversized (3.0 +/- 0.5 mm) SiO2-based particles with the great thermal stability and large contact area against the disc were used to reinforce the resin matrix. The effectiveness of the oversized particles relative to particles of other sizes was evaluated using an established test procedure. The results showed that the oversized particles improve the fade resistance and wear resistance of materials, but not followed with excessive disc wear.

上一条： Effect of Alloying Elements Gradient on Solid-State Diffusion Bonding between Aerospace Aluminum Alloys

下一条：The Size Effect of SiO2 Particles on Friction Mechanisms of a Composite Friction Material

副教授博士生导师硕士生导师

性别：男

毕业院校：大连理工大学

学位：博士

所在单位：材料科学与工程学院

学科：材料加工工程

办公地点：大连理工大学铸造中工程心

电子邮箱：