location: Current position: Home >> Scientific Research >> Paper Publications

A comparative study of constitutive models for flow stress behavior of medium carbon Cr-Ni-Mo alloyed steel at elevated temperature

Hits:

Indexed by:期刊论文

Date of Publication:2017-10-01

Journal:JOURNAL OF MATERIALS RESEARCH

Included Journals:SCIE

Volume:32

Issue:20

Page Number:3875-3884

ISSN No.:0884-2914

Abstract:A series of hot compression tests of medium carbon Cr-Ni-Mo-alloyed steel, 34CrNiMo steel, were conducted on a Gleeble-1500 thermal mechanical simulator, in a wide temperature range of 1173-1423 K and at a strain rate range of 0.002-5 s(-1). Three constitutive models, namely the Johnson-Cook (JC) model, strain compensated Arrhenius model, and the physically based constitutive model, were established to describe the hot deformation of 34CrNiMo steel.
   A comparative study of the three models was investigated by comparing the accuracy of prediction of flow stress behavior. The results imply that the JC model is not able to adequately represent the high-temperature flow behavior with the existance of recovery and recrystallization. The Arrhenius-type model based on mathematics has a good prediction in the flow stress behavior in all strain ranges during the hot deformation. The physically based constitutive model gives a better prediction accuracy of the deformation behavior in both flow stress and deformation mechanism.

Pre One:Study on Static Recrystallization Behavior of Medium-Carbon Cr-Ni-Mo Alloyed Steel During Hot Deformation

Next One:中碳34CrNiMo合金钢加热过程中奥氏体晶粒长大行为