location: Current position: Home >> Scientific Research >> Paper Publications

胀形间隙对核主泵转子屏蔽套真空热胀形的影响

Hits:

Date of Publication:2017-01-01

Journal:中国有色金属学报

Issue:4

Page Number:789-794

ISSN No.:1004-0609

Abstract:A 2-D axis-symmetrical thermo-mechanical coupled finite element model of vacuum hot bulge forming process of rotor can was established using non-linear finite element software MSC.Marc.The radius-direction displacement variation of rotor can and die were calculated and analyzed.The bulging dimension and internal diameter of rotor can after bulging forming were predicted.In addition,the effects of bulging clearance on the bulging dimension and internal diameter of rotor can after bulging forming were discussed on the basis of developed finite element model.The results indicate that,when the bulging clearance increases,the bulging dimension of rotor can decreases linearly and the internal diameter of rotor can after bulging forming never changes.The corresponding vacuum hot bulge forming experiments were conducted to verify the reliability of the finite element model.

Note:新增回溯数据

Pre One:Nimonic 80A镍基高温合金静态再结晶行为

Next One:38MnVS6非调质钢棒材轧后冷却过程中的组织转变