location: Current position: Home >> Scientific Research >> Paper Publications

Double-layer resist method to improve descum result when removing negative photoresist

Hits:

Indexed by:期刊论文

Date of Publication:2019-05-29

Journal:MICRO & NANO LETTERS

Included Journals:SCIE、EI

Volume:14

Issue:6

Page Number:694-697

ISSN No.:1750-0443

Key Words:photoresists; viscosity; etching; negative photoresist scum; low viscosity positive photoresist; AZ703; double-layer resist method; optimal retracting distance; bottom layer resist; top layer resist; top layer contact; size 8; 0 mum; size 1; 10 mum

Abstract:A novel double-layer resist method was presented in this work to decrease the negative photoresist scum. Positive photoresist was chosen as the bottom layer resist and negative photoresist as the top layer resist. This work studied the effect of viscosity and thickness of bottom layer resist on the mean number of scum. The experiment shows that the low viscosity positive photoresist AZ703, with the spin speed of 3000 r/min and the thickness of 1.10 um, had prominent effect on the removal of photoresist. To minimise the area of the top layer contact with substrate and further reduce the scum, 8 mu m was selected as the optimal retracting distance d of the bottom layer resist.

Pre One:Effect of oxygen partial pressure on crystal quality and electrical properties of RF sputtered PZT thin films under the fixed Ar flow and sputtering pressure

Next One:工程认证背景下"信号与系统"课程特点与教学策略探讨——以生物医学工程专业为例