更多
论文成果
Duct-venting of dust explosions in a 20 L sphere at elevated static activation overpressures
点击次数:
论文类型: 期刊论文
发表时间: 2014-11-01
发表刊物: JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES
收录刊物: SCIE、EI
卷号: 32
期号: 1
页面范围: 63-69
ISSN号: 0950-4230
关键字: Dust explosion; Duct venting; Vent duct; Secondary explosion
摘要: Ducts are often recommended in the design of dust explosion venting in order to discharge materials to safe locations. However, the maximum reduced overpressure increases in a duct-vented vessel rather than in a simply vented vessel. This needs to be studied further for understanding the duct-venting mechanism. Numerous duct-vented dust explosion experiments were conducted, using a 20 L spherical chamber at elevated static activation overpressures, ranging from 1.8 bar to 6 bar. Duct diameters of 15 mm and 28 mm, and duct lengths of 0 m (simply venting), I m and 2 m, were selected. Explosion pressures both in the vessel and in the duct were recorded by pressure sensors, with a frequency of 5 kHz. Flame signals in the duct were also obtained by phototransistors. Results indicate that the secondary explosion occurring in the duct increases the maximum reduced overpressure in the vessel. The secondary explosion is greatly affected by the duct diameter and static activation overpressure, and hence influences the amplification of the maximum reduced overpressure. Larger static activation overpressure decreases the severity of the secondary explosion, and hence decreases the increment in the maximum reduced overpressure. The secondary pressure peak is more obvious as the pressure accumulation is easier in a duct with a smaller diameter. However, the increment of the maximum reduced overpressure is smaller because blockage effect, flame front distortion, and turbulent mixing due to secondary explosion are weaker in a narrow duct. The influence of duct length on the maximum reduced overpressure is small at elevated static activation overpressures, ranging from 1.8 bar to 6 bar at 15 mm and 28 mm duct diameters. (C) 2014 Elsevier Ltd. All rights reserved.

闫兴清

工程师

性别: 男

毕业院校:大连理工大学

学位: 博士

所在单位:化工学院

学科:化工过程机械. 安全科学与工程

办公地点: 大连理工大学西校区H509

联系方式:13478665105

电子邮箱:yanxingqing@dlut.edu.cn

辽ICP备05001357号 地址:中国·辽宁省大连市甘井子区凌工路2号 邮编:116024
版权所有:大连理工大学
访问量: 手机版 English 大连理工大学 登录

开通时间:..

最后更新时间:..