点击次数：

论文类型： 期刊论文

发表时间： 2017-10-01

发表刊物： PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE

收录刊物： Scopus、SCIE、EI

卷号： 214

期号： 10

ISSN号： 1862-6300

关键字： annealing soft magnetic properties; Mo-doped Finemet; nanocrystalline materials

摘要： The thermal stability, microstructure, and soft magnetic properties as a function of annealing time were studied for Fe73.5Si13.5B9Cu1Nb3-xMox (x=0, 1, 2, 3) (atom percent, at.%,) ribbons. It was found that substituting Nb by Mo reduced the thermal stability. After 15min short time vacuum annealing, Fe73.5Si13.5B9Cu1Nb2Mo1 and Fe73.5Si13.5B9Cu1Nb1Mo2 samples obtained higher permeability and similar coercivity compared to the original Finemet alloy (Fe73.5Si13.5B9Cu1Nb3), Mo substituting Nb reduced the optimum annealing time in Finemet-type alloys, and meanwhile marginally increased the saturation magnetization. Substituting all Nb by Mo led to the earlier formation of non-soft magnetic phase, thus deteriorated the soft magnetic properties. XRD and TEM structural analysis showed that in Fe73.5Si13.5B9Cu1Nb2Mo1 and Fe73.5Si13.5B9Cu1Nb1Mo2 samples (annealed for 15min), nanocrystals approximate to 10nm in size were obtained, and the good soft magnetic properties of these alloys could be attributed to the small grain size. The relationship between annealing time, soft magnetic properties, and microstructure was established. Reducing annealing time and temperature to obtain best soft magnetic properties could cut down the production costs of Finemet-type alloys.