论文类型：期刊论文

第一作者：Feng, X.-J.

通讯作者：Feng, X.-J.(fengxiaojing.ct@gmail.com)

合写作者：Yang, Q.,Li, S.-L.,Luan, M.-T.

发表时间：2008-01-01

发表刊物：Electronic Journal of Geotechnical Engineering

收录刊物：EI、Scopus

文献类型：J

卷号：13 K

ISSN号：10893032

摘要：As pointed out by various researchers, consideration of the influence of the facing type on reinforcement loads is lacking in current limit equilibrium-based design methods for the internal stability design of geosynthetic reinforced soil walls. Also the displacement of walls and the strain of reinforcement are also related to the facing type. This paper reports the results of the three instrumented model walls. The walls were nominally identical except one wall was constructed with a rigid concrete block face, the other with a hinge joint wood face, and another with a flexible wrapped face. The displacement of wall face added with the increase of the stiffness of wall face under the same surcharge. The strain of the reinforcement was influenced by the facing stiffness, while the relation between them also effected by the loading type, backfill type etc. Under the strip load, the reinforcement strain in stiff-face wall was higher. The ductile of the wall failure was reduced with the increasing of facing stiffness. © 2008 EJGE.

是否译文：否