点击次数：

论文类型： 会议论文

发表时间： 2019-01-01

收录刊物： EI、CPCI-S

卷号： 2019-May

页面范围： 2022-2028

关键字： O-2 plasma; adhesion strength; solder wettability; anisotropic conductive films

摘要： O-2 plasma treatment is a useful way to increase adhesion strength between polymer resins and adhered substrates in electronic packaging areas. However, a low adhesion strength of polymer adhesives on the adhered surfaces is a critical issue for anisotropic conductive film (ACF) joint reliability, especially when it comes to moisture-induced effects. This paper discusses the effects of oxygen plasma treatment (100W 20mTorr 3min) on the wettability and reliability of solder ACFs joints on Au/Ni metal electrodes. We carried out the surface analysis using surface energy, AFM, XPS, FTIR and joint resistances, peel adhesion strength, and reliability. By using the contact angle and surface energy, the un-wetted solder joining was explained from a spontaneous wettability to a hindered wettability, as a reason for poor electrical performance and reliability after oxygen treatment. Although the resin and electrode adhesion was increased, it was proven that solder part played a more important role in determining joint reliability and mechanical property.