点击次数：

论文类型： 期刊论文

发表时间： 2015-02-01

发表刊物： JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS

收录刊物： SCIE、EI、Scopus

卷号： 26

期号： 2

页面范围： 933-942

ISSN号： 0957-4522

摘要： The size (volume) effect of solder balls on the interfacial reactions of Sn-3.0Ag-0.5Cu solders on both Cu and Ni-P pads in electronic packaging was systematically investigated. For the interfacial reaction on Cu pad, the smaller the solder ball is, the larger the interfacial Cu6Sn5 grains are, the thicker the intermetallic compound (IMC) layer is, and the less the Cu pad consumption is. The Cu concentration approached the solution saturation more rapidly in the smaller solder joints through grain boundary diffusion, resulting in smaller Cu outflux at the interface and consequently coarser interfacial Cu6Sn5 grains. For the interfacial reaction on Ni-P pad, the smaller the solder ball is, the earlier the transformation of interfacial IMCs from (Cu,Ni)(6)Sn-5 to (Ni,Cu)(3)Sn-4 occurs. The faster decreasing rate of Cu concentration in smaller molten solder resulted in the less supplying Cu influx and thus the earlier IMC transition. The Cu flux at the interface determines the growth kinetics and the phase transformation of interfacial IMCs on both Cu and Ni-P pads. Accordingly, the variation of Cu fluxes at the interface caused by solder ball volume results in the size effect.