Hits:

Indexed by:期刊论文

Date of Publication:2019-12-01

Journal:JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS

Included Journals:SCIE、EI

Volume:11

Issue:6

ISSN No.:1948-5085

Key Words:oscillating heat pipe (OHP); phase change materials (PCMs); erythritol; slug oscillations; thermal resistance

Abstract:This paper presents an investigation of a three-phase oscillating heat pipe (3P OHP). The working fluid in the OHP consists of phase change material (PCM) and water. During the operation, the PCM changes the phase between solid and liquid, and water changes phase between liquid and vapor. The OHP investigated herein contains three phases: solid, liquid, and vapor. Erythritol was selected as the PCM with an instant cooling effect when dissolved in water due to the high fusion heat of 340 J/g. When the working fluid flows into the evaporator section, the PCM solid phase of the working fluid can become liquid phase in the evaporator, and the PCM liquid phase of the working fluid become solid phase in the condenser. The effects of heat input ranging from 100 to 420 W, and the erythritol concentration ranging from 1 to 50 wt % on the slug oscillations, and the OHP thermal performance was investigated. Experimental results show that while the erythritol can help to increase the heat transfer performance of an OHP, the heat transfer performance depends on the erythritol concentration. With a range of 1-5 wt % concentration of erythritol/water mixtures, a maximum 10% increase in the thermal performance was observed. When the erythritol concentration of erythritol/water mixtures was increased to a range of 10-50 wt %, the thermal performance of OHPs was lower than pure water-filled OHP, and the thermal performance decreased as the erythritol concentration was further increased. In addition, visualization results showed that slug oscillation amplitudes and velocities were reduced in the OHPs with erythritol solution compared with water-filled OHP.