常亚超

个人信息Personal Information

副教授

博士生导师

硕士生导师

性别:男

毕业院校:大连理工大学

学位:博士

所在单位:能源与动力学院

学科:工程热物理

办公地点:能源与动力学院809

联系方式:15140422034

电子邮箱:changyc@dlut.edu.cn

扫描关注

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

Computational optimization of fuel supply, syngas composition, and intake conditions for a syngas/diesel RCCI engine

点击次数:

论文类型:期刊论文

发表时间:2021-03-04

发表刊物:FUEL

卷号:234

页面范围:120-134

ISSN号:0016-2361

关键字:Syngas/diesel dual fuel; Reactivity controlled compression (RCCI); Genetic algorithm; Fuel supply; Syngas composition; Intake conditions

摘要:By utilizing the promising alternative fuel of syngas, and the syngas/diesel dual-fuel reactivity controlled compression ignition (RCCI) is a potential combustion strategy for internal combustion engines. However, the optimal operating parameters for syngas/diesel RCCI engines under wide operating conditions have not been investigated. In this study, the operating parameters include fuel supply, syngas composition, and intake conditions of a syngas/diesel RCCI engine were optimized under wide load by integrating the KIVA-3V code and the non-dominated sort genetic algorithm II (NSGA-II). The results indicated that nitrogen oxides (NOx) emissions can be controlled in considerably low levels, and the efficient combustion of the premixed syngas in the squish region can be realized with high premix ratio and early pilot injection of diesel. Equivalent indicated specific fuel consumption (EISFC) and ringing intensity (RI) are the major issues for the optimization at low and mid load, respectively. The double diesel injection strategy with the relatively late main injection timing is an effective way to both improve combustion efficiency at the low load and reduce RI at the mid load. For the double diesel injection, the ratio of pilot injection is controlled in a narrow range to provide sufficient high reactivity fuel in the piston bowl and to avoid the local high-temperature combustion region simultaneously. With the restrictions of EISFC and RI, the optimal H-2 fraction in the syngas is 60-80%. Based on the optimal fuel supply and intake conditions, a syngas with 75% H-2 and the diluent factor C of 0.8 is capable of realizing the high efficiency, moderate combustion, and low emissions for the RCCI engine at full load range.