location: Current position: Home >> Scientific Research >> Paper Publications

Miniature fiber-optic tip pressure sensor assembled by hydroxide catalysis bonding technology

Hits:

Indexed by:Journal Papers

Date of Publication:2020-01-20

Journal:OPTICS EXPRESS

Included Journals:EI、SCIE

Volume:28

Issue:2

Page Number:948-958

ISSN No.:1094-4087

Abstract:A miniature fiber-optic tip Fabry-Perot (FP) pressure sensor with excellent high-temperature survivability, assembled by hydroxide catalysis bonding (HCB) technology, is proposed and experimentally demonstrated. A standard single-mode fiber is fusion spliced to a fused silica hollow tube with an outer diameter (OD) of 125 mu m, and a 1-mu m-thick circular silicon diaphragm with a diameter slightly larger than the OD is bonded to the other endface of the hollow tube by HCB technology. The ultrathin silicon diaphragm is prepared on a silicon-on-insulator (SOI) wafer produced by microelectromechanical systems (MEMS), providing the capability of large-scale mass production. The HCB technology enables a polymer-free bonding between diaphragm and hollow tube on fiber tip with the obvious advantages of high alignment precision, normal pressure and temperature (NPT) operation, and reliable effectiveness. The static pressure and temperature response of the proposed sensor are discussed. Results show that the sensor has a measurable pressure range of 0 similar to 100 kPa, which is well consistent with the measurement range of biological blood pressure. The pressure sensitivity is up to 2.13 nm/kPa with a resolution of 0.32% (0.32kPa). Besides, the sensor possesses a unique high-temperature resistant capability up to 600 degrees C, which can easily survive even in high-temperature sterilization processes, and it has a low temperature dependence of 0.09 kPa/degrees C due to the induced HCB bonding technology and the silicon-based diaphragm. Thus, the proposed fiber tip pressure sensor is desirable for invasive biomedical pressure diagnostics and pressure monitoring in related harsh environments. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

Pre One:Sensitive detection of humidity based on tilted fiber Bragg grating coated with Graphene oxide and multi-walled carbon nanotubes

Next One:An open-cavity fiber Fabry-Perot interferometer fabricated by femtosecond laser micromachining for refractive index sensing