点击次数：

论文类型：期刊论文

发表时间：2009-07-01

发表刊物：176th Annual Conference of the Japan-Society-for-the-Promotion-of-Science

收录刊物：SCIE、EI、CPCI-S、Scopus

卷号：50

期号：7,SI

页面范围：1649-1654

ISSN号：1345-9678

关键字：plasma arc weld bonding; pores behaviors; magnesium alloy

摘要：A new welding technology called "plasma arc weld bonding" was designed by combining the plasma arc welding and adhesive bonding process in the lap welding of magnesium alloy. During the "plasma arc weld bonding" process, the major difficulty was the presence of porosity in the welding joint. This paper analyzed the formation mechanism of pores and the effect of welding parameters on pores behaviors during plasma arc weld bonding process of magnesium alloy by optical microscopy and electron probe microanalysis. The results showed that it easily formed a lot of pores in joint because of the existence of adhesive layer. The decomposition of adhesive in both the sides of welding seam was the main cause for the formation of pores. The regular-shape pores were formed by CO and CO,, and the anomalous-shape pores were formed by the low molecular weight hydrocarbons. The pores behaviors were affected evidently by the heat input, and the favorable joint could be obtained when the heat input was about 396kJ/m. [doi:10.2320/matertrans.MF200919]