|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：哈尔滨工业大学
学位：博士
所在单位：材料科学与工程学院
电子邮箱：liulm@dlut.edu.cn
扫描关注
- [41]周彦彬, 史吉鹏, 刘黎明.MAG-TIG双电弧共熔池热源打底焊接自由成形研究[J],机械工程学报,2017,54(10):78-84
- [42]孙承帅, 张兆栋, 刘黎明.激光诱导MIG电弧增材制造5356铝合金薄壁零件组织及力学性能[J],焊接技术,2017,05:47-50
- [43]刁卓, 宋刚, 刘黎明.激光-电弧复合焊接AZ31B/ZM5异种镁合金组织及性能分析[J],焊接技术,2017,05:30-34
- [44]宋刚, 于景威, 刘黎明.激光离焦量对镁/钢异种金属激光-TIG复合焊的影响[J],焊接技术,2017,05:62-66
- [45]Shi, Jipeng, Zhou, Yanbin, Liu, Liming, LM (reprint author), Dalian Univ Technol, Key Lab Liaoning Adv Welding & Joining Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Application of Pulsed Laser-TIG Hybrid Heat Source in Root Welding of Thick Plate Titanium Allo...[J],APPLIED SCIENCES-BASEL,2017,7(5)
- [46]Zhou, Yan-Bin, Fang, Di-Sheng, Liu, Li-Ming, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Liaoning Adv Welding & Joining Technol, Dalian 116024, Peoples R China..Root Welding of V-Groove Thick Plate without Backing Plate by MAG-TIG Double-Arc Welding[J],INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2017,18(4):623-628
- [47]史吉鹏, 王红阳, 杨林波, 刘黎明, Liu, Liming(liulm@dlut.edu.cn).钛合金激光-TIG复合焊接保护状态对焊缝成形及性能影响[J],焊接学报,2017,38(2):61-65
- [48]Fang, Disheng, Liu, Liming, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Key Lab Liaoning Adv Welding & Joining Technol, Dalian 116024, Peoples R China..Analysis of process parameter effects during narrow-gap triple-wire gas indirect arc welding[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,88(9-12):2717-2725
- [49]刘黎明.Study on Plasma Behaviors and Induction Efficiency of Laser on Arc in Laser-Arc Hybrid Welding Po...[J],Welding and Cutting in China,2017,176-184
- [50]Liu, Liming, Fang, Disheng, Song, Gang, LM (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian, Liaoning Provin, Peoples R China..Experimental Investigation of Wire Arrangements for Narrow-Gap Triple-Wire Gas Indirect Arc Wel...[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(16):2136-2142
- [51]宋刚, 宋士平, 刘黎明.Q235薄板高速电弧搭接焊工艺及效率分析[J],焊接技术,2016,11:43-46
- [52]王鹏, 张兆栋, 宋刚, 刘黎明.铝合金激光-电弧复合增材制造工艺分析[J],焊接技术,2016,10:10-13
- [53]Shi J.-P., Zhou Y.-B., Liu L.-M., Liu, L.-M., College of Materials Science, Engineering, Dalian University of TechnologyChina, email: liulm@dlut.edu.cn.Root welding process in laser-TIG hybrid welding of titanium alloy thick plate[J],Guangxue Jingmi Gongcheng/Optics and Precision Engineering,2016,24:280-286
- [54]周彦彬, 刘黎明.中厚板对接MAG-TIG双电弧打底焊研究[J],焊接技术,2016,07:5-8+4
- [55]宋刚, 刘黎明, 于景威, 王杰.AZ31 B／Q235激光诱导电弧填丝焊连接界面分析[J],焊接学报,2016,37(7):93-96
- [56]刘黎明, 史吉鹏, 王红阳, Wang, Hongyang(wang-hy@dlut.edu.cn).低功率激光诱导电弧复合焊接钛合金薄板工艺研究[J],机械工程学报,2016,52(18):38-43,50
- [57]方迪生, 刘黎明.气体保护三丝间接电弧焊熔滴过渡行为分析[J],焊接技术,2016,05:22-25
- [58]刘晓红, 王红阳, 刘黎明.焊后热处理对6061-T6铝合金激光-电弧复合焊接性能的影响[J],焊接技术,2016,05:26-29
- [59]方迪生, 刘黎明.气体保护三丝间接电弧焊熔滴过渡行为分析[A],2016,Vol.45:4
- [60]宋刚, 王杰, 于景威, 刘黎明.添加过渡层的镁合金/钢激光-TIG电弧复合熔化焊接机制[J],焊接学报,2016,37(5):69-72