location: Current position: Home >> Scientific Research >> Paper Publications

Simple method for self-referenced and lable-free biosensing by using a capillary sensing element

Hits:

Indexed by:期刊论文

Date of Publication:2017-05-15

Journal:OPTICS EXPRESS

Included Journals:SCIE、EI

Volume:25

Issue:10

Page Number:11750-11759

ISSN No.:1094-4087

Abstract:We demonstrated a simple method for self-reference and label free biosensing based on a capillary sensing element and common optoelectronic devices. The capillary sensing element is illuminated by a light-emitting diode (LED) light source and detected by a webcam. Part of gold film that deposited on the tubing wall is functionalized to carry on the biological information in the excited SPR modes. The end face of the capillary was monitored and separate regions of interest (ROIs) were selected as the measurement channel and the reference channel. In the ROIs, the biological information can be accurately extracted from the image by simple image processing. Moreover, temperature fluctuation, bulk RI fluctuation, light source fluctuation and other factors can be effectively compensated during detection. Our biosensing device has a sensitivity of 1145%/RIU and a resolution better than 5.287 x 10(-4) RIU, considering a 0.79% noise level. We apply it for concanavalin A (Con A) biological measurement, which has an approximately linear response to the specific analyte concentration. This simple method provides a new approach for multichannel SPR sensing and reference-compensated calibration of SPR signal for label-free detection. (C) 2017 Optical Society of America

Pre One:微结构光纤表面等离子激元共振传感器的研究

Next One:Dual channel multilayer-coated surface plasmon resonance sensor for dual refractive index range measurements