Release Time:2019-03-13  Hits:

Indexed by: Journal Article

Date of Publication: 2016-05-28

Journal: JOURNAL OF MATERIALS RESEARCH

Included Journals: EI、SCIE

Volume: 31

Issue: 10

Page Number: 1491-1500

ISSN: 0884-2914

Abstract: The effect of annealing treatment on the microstructures, mechanical, and wear properties of a CuZnAlMnSiNiCr brass alloy is investigated. The results indicate that nanosized Mn5Si3 particles are observed to precipitate from the phase at temperatures above 750 degrees C. After annealing at 800 degrees C for 4 h, the formation of finely, coherent precipitates dispersed within the matrix results in the great improvement of strength, hardness and thus the high wear resistance, which can be proven by the decreased wear rates and friction coefficients. According to the examination of the wear topography, adhesive, abrasive, and oxidative wear are found to be the major wear forms during the dry sliding wear. After the precipitation-hardening treatment, the adhesion and abrasion decrease, and few spallings and cracks are observed on the worn surfaces. In addition, the wear behavior of the alloy is found to be strongly dependent on its strength and hardness.