location: Current position: Home >> Scientific Research >> Paper Publications

Delay characteristics and controller design of a triggered vacuum switch

Hits:

Indexed by:期刊论文

Date of Publication:2007-08-01

Journal:22nd IEEE International Symposium on Discharges and Electrical Insulation in Vacuum

Included Journals:SCIE、EI、CPCI-S、Scopus

Volume:35

Issue:4,SI

Page Number:891-896

ISSN No.:0093-3813

Key Words:delay effects; jitter; triggered vacuum switch (TVS)

Abstract:Two types of triggered vacuum switches (TVSs) named TVS-1 and TVS-2 with different configuration in trigger unit were described for investigating the delay characteristics. A design circuit for controlling the TVS is proposed herein. The trigger energy of the controller can be adjusted conveniently. By means of changing the trigger energy, the experimental data show that the delay and jitter times decrease with increasing trigger energy. The delay and jitter times decreases magnificently with the increasing voltage in the main gap. By increasing the main-gap voltage, the triggered probability increases. The TVS-2 has better performance in delay characteristics than TVS-1 because of the improvement in the trigger structure. With a trigger energy of 0.064 J, it is possible to fire both of the TVSs. For the TVS-2 case, the delay time decreases to 2.3 mu s, and its jitter time decreases to 1.2 mu s when the trigger energy is 1.6 J.

Pre One:基于热传导模型的场击穿型触发真空开关研究

Next One:电解槽全电流投切开关设计与仿真分析