|
个人信息Personal Information
教授
博士生导师
硕士生导师
性别：男
毕业院校：大连理工大学
学位：博士
所在单位：材料科学与工程学院
学科：材料加工工程
办公地点：知远楼，B535室
联系方式：wlzhou@dlut.edu.cn
电子邮箱：wlzhou@dlut.edu.cn
扫描关注
- [361]Li, Kang, Rui-dong, Gai, Peng-tao, Zhi-qiang, Zhou, Wen-long, Chen, Guo-qing, Fu, Xue-song, WL (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..Fretting fatigue characteristic of Ti-6Al-4V strengthened by wet peening[J],INTERNATIONAL JOURNAL OF FATIGUE,2016,85:65-69
- [362]阴晓宁, 付雪松, 陈国清, 周文龙, 盖鹏涛, 李志强, Zhou, W., School of Materials Science, Engineering, Dalian University of TechnologyChina, email: wlzhou@126.com.湿喷丸强化对TC4钛合金表面状态及疲劳性能的影响[J],金属热处理,2016,41(3):48-53
- [363]李峻安, 周文龙, 卢伟国, 宁保国.两种典型滚丝轮失效的对比分析[J],热加工工艺,2016,45(10):250-253
- [364]付雪松, 陈国清, 周文龙.Mechanical properties of strengthened surface layer in Ti6Al4V alloy induced by wet peening treat...[J],Trans Nonferrous Met Soc China,2016,26(12):2868-2873
- [365]Fu Xue-song, Li Kang, Sun Wei, Liu Cheng-fang, Chen Guo-qing, Zhou Wen-long.Springback Simulation in Air Bending of Titanium Alloy Sheet Using Solid Shell Element[A],2016,43:596-602
- [366]陈国清, 周文龙, 付雪松, 王琪, 汤华平.Ti-43.5Al-4Nb-1Mo-0.3B合金中β相行为和特征[J],材料热处理学报,2015,36(12):19-25
- [367]Li, Kang, Fu, Xue-song, Rui-dong, Zhou, Wen-long, Zhi-qiang, WL (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..A mechanism study on characteristic curve of residual stress field in Ti-6Al-4V induced by wet ...[J],MATERIALS & DESIGN,2015,86:761-764
- [368]吕柏林, 崔跃, 高学朋, 吴敏, 刘峰, 苏辉, 周文龙, 陈国清.石墨摩擦学性能、润滑机理及改性的研究进展[J],材料导报,2015,29(19):60-66
- [369]Dong, Honggang, Yu, Lianzhen, Deng, Dewei, Zhou, Wenlong, Chuang, HG (reprint author), Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Peoples R China..Direct Friction Welding of TiAl Alloy to 42CrMo Steel Rods[J],MATERIALS AND MANUFACTURING PROCESSES,2015,30(9):1104-1108
- [370]李瑞冬, 付雪松, 周文龙, 陈国清, 李志强.喷丸强化与涂层复合表面处理改善Ti-6Al-4V钛合金抗微动磨损性能[J],航空制造技术,2015,17:96-99
- [371]Dong, Honggang, Yu, Lianzhen, Deng, Dewei, Zhou, Wenlong, Chuang, HG (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China..Effect of Post-weld Heat Treatment on Properties of Friction Welded Joint Between TC4 Titanium ...[J],JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2015,31(9):962-968
- [372]李瑞冬, 付雪松, 周文龙, 陈国清, 李志强.喷丸强化与涂层复合表面处理改善Ti-6Al-4V钛合金抗微动磨损性能[A],2015,96-99
- [373]Liu, Cheng-fang, Zhou, Wen-long, Fu, Xue-song, Chen, Guo-qing, XS (reprint author), Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116085, Peoples R China..A new mathematical model for determining the longitudinal strain in cold roll forming process[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,79(5-8):1055-1061
- [374]Liu, Xin, Xu, Wenji, Zhou, Wenlong, Lu, Yao, Yang, Xiaolong, Huang, Shuai, Chen, Faze, X (reprint author), Dalian Univ Technol, Minist Educ, Key Lab Precis & Nontradit Machining Technol, Dalian 116024, Peoples R China..Characteristic and Application Study of Cold Atmospheric-Pressure Nitrogen Plasma Jet[J],IEEE TRANSACTIONS ON PLASMA SCIENCE,2015,43(6):1959-1968
- [375]王斌, 张凯锋, 周文龙, 林鹏, 蒋少松, Wang, B., National Key Laboratory for Precision Hot Processing of Metals, Harbin Institute of TechnologyChina.固溶温度对 Ti2 AlNb 基合金组织演变的影响[J],航空材料学报,2015,35(3):7-12
- [376]李鸿翔, 陈国清, 王惠敏, 周文龙.MSR 局部结构的流固耦合有限元分析[J],汽轮机技术,2015,2:108-110,127
- [377]付敏, 周文龙, 陈亮, 林松, Zhou, W., School of Sciences, Engineering, Dalian University of TechnologyChina.纤维缠绕复合材料气瓶内衬的屈曲分析[J],材料科学与工艺,2015,23(2):86-90
- [378]庞慧芳, 付雪松, 杨思泽, 包翠敏, 周文龙, Zhou, W., School of Materials Science, Engineering, Dalian University of TechnologyChina.时效对17-4 PH马氏体不锈钢抗应力腐蚀性能的影响[J],金属热处理,2015,40(3):104-108
- [379]付雪松, 陈国清, 周文龙.喷丸强化与涂层复合表面处理改善 Ti-6Al-4V钛合金抗微动磨损性能[J],航空制造技术,2015
- [380]祖宇飞, 周文龙, 韩文波, 付雪松, 陈国清.氧化物陶瓷高速超塑性研究进展[J],中国科学. 技术科学,2015,45(4):377-388