点击次数：

论文类型：期刊论文

发表时间：2015-09-01

发表刊物：OPTICS AND LASERS IN ENGINEERING

收录刊物：SCIE、EI、Scopus

卷号：72

页面范围：39-46

ISSN号：0143-8166

关键字：Hastelloy C-276; Pulsed laser welding; Microstructure; Tensile property; Dislocation piling-up

摘要：For evaluating the microstructure evolution and mechanical property of Ni-based Hastelloy C-276 weld joint by the pulsed laser welding, the influence of pulsed laser welding on the microstructure and mechanical property of the weld joint is investigated by the analysis of the microstructure morphology, microhardness, phase structure and tensile property. The results indicate that, in the fusion zone three sections are divided on the basis of the patterns of grain structures. In the weld joint, the element segregation is found, but the trend of brittle phase's formation is weakened. The weld microhardness presents just a little higher than that of base metal, and there is no obvious the softened heat affected zone. Meanwhile in the weld joint, the phase structure is still the face-center cubic with the tiny shift of peak positions and widened Full Width at Half-Maximum. The yield strength of weld joint is the same as that of base metal, and the tensile strength is nearly 90% of that of base metal. The decreased tensile strength is mainly attributed to the dislocation piling-up. (C) 2015 Elsevier Ltd. All rights reserved.