点击次数：

论文类型：期刊论文

发表时间：2016-04-15

发表刊物：MATERIALS & DESIGN

收录刊物：SCIE、EI

卷号：96

页面范围：16-26

ISSN号：0264-1275

关键字：Reactive power concrete; Short-cut super-fine stainless wire; Fiber reinforcement; Mechanical properties; Flexural toughness; Microstructure

摘要：Short-cut super-fine stainless wire (SSSW) with super-fine diameter and high aspect ratio is used to reinforce reactive powder concrete (RPC). The mechanical behaviors of SSSW reinforced RPC (SSSWRRPC) cured at different regimes are investigated under different loading conditions. The calculation models of flexural strength and toughness of SSSWRRPC are established based on the microstructure analysis, the composite theory, the expression of bond strength between SSSWs and RPC matrix, and the effective coefficient of SSSWs numbers. The results demonstrate that, by incorporating only 0.5 vol% of SSSW, the mechanical strength and toughness of RPC has been significantly increased. The 1.5 vol% of SSSW can increase the flexural strength and fracture energy 103.2% and 442.2% respectively. The reinforcing effect of SSSWs in aspect ratio of 500 and diameter of 20 mu m is superior to that of SSSWs in aspect ratio of 1250 and diameter of 8 mu m. The improvement of mechanical behavior is closely related to curing condition. The microstructure analysis indicates that the strengthen effect of SSSW on RPC results from the extensive reinforcing network, the inhibition on micro-cracks development and the pull-out, contortion and stripping of SSSWs under loading. (C) 2016 Elsevier Ltd. All rights reserved.