点击次数：
论文类型：期刊论文
发表时间：2011-10-15
发表刊物：APPLIED SURFACE SCIENCE
收录刊物：Scopus、SCIE、EI
卷号：258
期号：1
页面范围：388-393
ISSN号：0169-4332
关键字：Wettability; Surface free energy; Armos fibers; DBD plasma; Tensile strength
摘要：Wettability of Armos fibers has been investigated after exposed to dielectric barrier discharge (DBD) plasma, which was performed at atmospheric pressure in air while varying the sample treatment time between 9 and 27 s. Contact angles and surface free energy of the original and plasma-treated fibers were measured with dynamic contact angle analysis (DCAA) to reveal the correlation between the fiber wettability and the surface treatment, including surface composition and topography modifications, which were evaluated by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. It was found by XPS analysis that the O/C atomic ratio on Armos fiber surface can be increased from 0.134 to 0.248 after the 18 s exposure to the plasma and many polar functional groups were proved to be incorporated into the surface, which aided good wetting. In addition, AFM observations revealed the changes of fiber surface microstructure, showing significant enhancement of the surface roughness after the treatment, which could also bring the fiber better wettability. What's more, the impacts of fiber surface treatment on its tensile properties were characterized by single fiber tensile strength (SFTS) testing. Results showed that Armos fibers exhibited only slight reductions in their tensile strengths with the great enhancement in fiber surface free energy. (C) 2011 Elsevier B. V. All rights reserved.