location: Current position: Home >> Scientific Research >> Paper Publications

TRUNCATED MODEL TESTS FOR MOORING LINES OF A SEMI-SUBMERSIBLE PLATFORM AND ITS EQUIVALENT COMPENSATED METHOD

Hits:

Indexed by:期刊论文

Date of Publication:2014-04-01

Journal:JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN

Included Journals:SCIE、EI、Scopus

Volume:22

Issue:2

Page Number:125-136

ISSN No.:1023-2796

Key Words:truncated; model test; viscous damper; semi-submersible platform

Abstract:This study conducted a model test of 1:100 model scale of a semi-submersible platform with a 1500 m full-depth mooring system in the Joint Laboratory of Wind Tunnel & Wave Flume at Harbin Institute of Technology. A truncated mooring system of 400 m water depth was designed based on the static equivalent principle. The semi-submersible platform was tested under regular wave excitation periods that ranged from 10 s to 45 s and one year of irregular wave conditions in the South China Sea. The results validated the feasibility of using numerical simulation in the motions calculation of semi-submersible platform and showed that mooring damping may contribute significantly to the total damping of deepwater floating platform in the low frequency range. The viscous damper was designed to simulate the contribution of mooring damping and added to the numerical simulation of the motion calculation of semi-submersible platform with the truncated mooring line. The numerical simulation results were compared with the motion calculation of semi-submersible platform with the full-depth mooring line. This method can help solve the differences in the dynamics of truncated model tests that are typically used in ocean engineering.

Pre One:不同类型锚泊方式对深水浮式平台的阻尼贡献比较计算

Next One:Use of different mooring models on global response analysis of an innovative deep draft platform