Patterning of water traps using close-loop hydrophilic micro grooves

2019-03-12 Hits:

Indexed by:期刊论文

Date of Publication:2016-12-15

Journal:APPLIED SURFACE SCIENCE

Included Journals:SCIE、EI、Scopus

Volume:389

Page Number:447-454

ISSN No.:0169-4332

Key Words:Superhydrophobic surface; Patterns; Electrochemical etching; Micromilling; Water storage

Abstract:Milling technique was proposed to fabricate close-loop hydrophilic groove (CLHG) patterns on super hydrophobic Al alloy surface. On account of the pinning force that derives from the milled smooth grooves, water can be trapped and stretched into thin water films with different shapes on the super hydrophobic substrate. The contact angle of 13 mu L water film trapped by a circular CLHG with an outer diameter of 10.3 mm was only 5.8 degrees Water films trapped by the CLHGs are similar to those hydrophilic/superhydrophilic patterns and have great water trapping capacity. The critical water trapping volume (CWTV) and sliding resistance of droplets on the circular CLHGs versus outer diameters and groove widths of the CLHGs were investigated. The results indicate that both the CWTV and sliding resistance are independent of the groove widths but closely related to the CLHG outer diameters. Compared with plasma-treated superhydrophilic dots, the circular CLHGs have equal CWTV and sliding resistance. This water-film patterning method has advantages like high efficiency and less liquid loss in liquid shifting processes, and therefore can possibly find such applications as large-area liquid patterning and water storage on superhydrophobic substrates. (C) 2016 Elsevier B.V. All rights reserved.

Date of Publication:2016-12-15